[nsp] BGP load sharing over multiple links between 2 routers

[Elliott, Andrew]

I am assuming since you are running BGP with your customer, that you are
running ebgp... if you were using ibgp multipath, it would be
"maximum-path ibgp <X>"



router bgp <XXX>
maximum-paths <X>
-----
A good link is at 

(CCO login required)

http://www.cisco.com/en/US/partner/products/sw/iosswrel/ps1839/products_
feature_guide09186a0080087afe.html

-andrew

-----Original Message-----
From: Mourad BERKANE [mailto:mourad.berkane at lambdanet.fr] 
Sent: Wednesday, May 14, 2003 8:46 AM
To: 'cisco-nsp at puck.nether.net'
Subject: [nsp] BGP load sharing over multiple links between 2 routers


Hi Folks,

Regarding following configuration with one BGP session between loopback
routers over multipath links:


   ----------------------------------------------
CE ---------------(multipath BGP config)--------- PE
   ----------------------------------------------


Cisco 7500                                        Juniper M20


What is the Cisco equivalent of Juniper multipath BGP configuration?
Any good pointer appreciated :-)

Thanks & Best Regards,
Mourad
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
http://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/