[nsp] Rate-limit Problem.

[Volodymyr Yakovenko]

On Tue, May 20, 2003 at 03:05:08PM +0530, Mahesh S wrote:
>Hi,
>We have the following configs on the interface for Rate-limit
>
> interface Serial9/0/2
> bandwidth 2048
> rate-limit output 768000 8000 8000 conform-action transmit exceed-action
>drop
>
> Serial9/0/2 is up, line protocol is up
>
> 5 minute input rate 216000 bits/sec, 249 packets/sec
> 5 minute output rate 1135000 bits/sec, 341 packets/sec
>
>My issue is when we have set the rate-limit for 768k why is the output going
>beyond the set limit.

Could you possibly show sh ver output?

Some IOS versions (12.1(5)Tsomething as example) were affected by CAR bugs.

-- 
Regards,
Volodymyr.