[nsp] cat3550 traffic shaping

[Ali Kemal Yurtseven]

	Hi,

	I have a Cat 3550 , on which there are several customers
connected. What I want to do is limit the bandwidth for these customers.
If I use the service-policy command, at ingress, and one for the
interface that the switch is connected to the network, since there can't
be more than 8 policers for an interface , it causes problem. What is
the proper way of limiting the bandwidth (both ingress and egress) on
3550 ?

Ali Kemal Yurtseven
Network Engineer
Meteksan Net
Phone: +90 312 2979035
Fax    : +90 312 2979155