[nsp] NM-2w 2600 wont detect
Voll, Scott
Scott.Voll at wesd.org
Tue May 20 17:08:11 EDT 2003
Look for an ios upgrade. Someone can correct me if I'm wrong, but I
believe that it's like a feature that only some IOSs have.
--Scott
-----Original Message-----
From: James hampton [mailto:jamhampton at toast.net]
Sent: Tuesday, May 20, 2003 2:53 PM
To: cisco-nsp at puck.nether.net
Subject: [nsp] NM-2w 2600 wont detect
I have a 2600 that wont detect aN NM-2w modual. It has IOS 12.0(7)T2,
the Cisco site says 12.0(7)XK is needed for NM-2w. Im not sure if
12.0(7)T2 is an earlier or later release than 12.0(7)XK. Should I
upgrade IOS or look for another problem? Thanks
James
_______________________________________________
cisco-nsp mailing list cisco-nsp at puck.nether.net
http://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
More information about the cisco-nsp
mailing list