[nsp] Missing QoS commands on 72xx?

[John Jackson]

We had to upgrade to 12.2(14)S1 to get priority Q's.   I don' t know how
this effects MPLS since we are doing that (yet)

HTH
John


> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-
> bounces at puck.nether.net] On Behalf Of sgsubs at vdata.co.uk
> Sent: Thursday, May 22, 2003 5:38 AM
> To: Nsp (E-mail)
> Subject: [nsp] Missing QoS commands on 72xx?
> 
> Does anyone have any experience of QoS on the 72xx platform?
> 
> According to the Cisco page 12.0S MPLS QoS I should be able to specify a
> bandwidth command on the policy-map for a class.
> 
> http://www.cisco.com/en/US/products/sw/iosswrel/ps1829/products_feature_gu
> ide09186a00800b4636.html#95095
> 
> I have tried this on 12.0(24)S1 (P )and 12.0(25)S (P) neither of these
> versions have the priority command or the bandwidth command.
> How are other SP's implementing QoS on these platforms, is the
> documentation wrong or am I missing something?
> 
> Thanks in advance
> 
> Regards,
> 
> Steven..
> 
> ________________________________________________________________________
> This message has been checked for all known viruses by the
> CitC Virus Scanning Service powered by SkyLabs. For further information
> visit
> http://www.citc.it
> 
> ___
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/