[nsp] Connecting a 7200 to a 2600

Gert Doering gert at greenie.muc.de
Thu Nov 6 03:34:17 EST 2003


On Wed, Nov 05, 2003 at 05:05:47PM -0500, Jim Brunetti wrote:
> The E1 port on the 7200 is a DB15 Male connector (no internal CSU/DSU), while

That's the PA-2E1, isn't it?  As far as I know, it *does* have an internal
CSU/DSU, and just uses a weird cable (same thing as the NM-2CE1B for the
2600 and 3600 series).

Cisco has a cable from the DB15 to RJ48c, and then you'd just need to swap
RX and TX wires (1+2 <-> 3+6) with an adapter cable.

USENET is *not* the non-clickable part of WWW!
Gert Doering - Munich, Germany                             gert at greenie.muc.de
fax: +49-89-35655025                        gert at net.informatik.tu-muenchen.de

More information about the cisco-nsp mailing list