[nsp] load balancing over parallel DSL lines

[Mark E. Mallett]

On Thu, Nov 06, 2003 at 03:29:53PM -0500, Streiner, Justin wrote:
> On Thu, 6 Nov 2003, Mark E. Mallett wrote:
> 
> > Wondering if anyone has success in doing load balancing over DSL
> > destinations backhauled via ATM.  Given RBE setup including this:
> 
> You may want to try changing the routes to look like this:
> 
> ip route <network> <mask> <interface>
> i.e.
> ip route 10.10.1.0 255.255.255.0 atm1/0.301
> 
> You could also throw on the IP address of the next-hop:
> ip route <network> <mask> <interface> <nexthop-ip>
> 
> I recall running into similar situations where per-packetl oad-sharing
> using CEF didn't work until the routes were changed.  Give it a try.

That is a great thought, thanks.  So far, though, it doesn't seem
to have made a difference.  :(

mm