[nsp] OSPFv3

[Jared Mauch]

	here's an example of a working ospfv3 config i have on
one of my boxes.

IOS (tm) 3600 Software (C3640-IK9S-M), Version 12.3(3), RELEASE SOFTWARE (fc2)
!
interface FastEthernet0/0
 ipv6 address 3FFE:A00:F:1::1/126
 ipv6 ospf 267 area 0
!
ipv6 router ospf 267
 log-adjacency-changes
!


On Wed, Oct 01, 2003 at 05:13:55PM +0200, Nicolas DEFFAYET wrote:
> Hello,
> 
> I try to run OSPFv3 on a lab router.
> This router run "IOS (tm) 2500 Software (C2500-IS-L), Version 12.3(3),
> RELEASE SOFTWARE (fc2)".
> 
> brutus(config)#ipv6 router ospf 25358
> brutus(config)#
> 
> Why i don't get:
> brutus(config-router)#
> 
> 
> The commands:
> 
> sh ipv6 ospf
> 
> and
> 
> int Ethernet0
>  ipv6 ospf 25358 area 0 enable
> 
> don't exist...
> 
> 
> Anyone use OSPFv3 on a 2500 router or have a idea about this ?
> 
> Thanks
> 
> Best Regards,
>  
> -- 
> Nicolas DEFFAYET, NDSoftware
> NDSoftware IP Network: http://www.ip.ndsoftware.net/
> FNIX6 (French National Internet Exchange IPv6): http://www.fnix6.net/
> EuroNOG: http://www.euronog.org/
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/

-- 
Jared Mauch  | pgp key available via finger from jared at puck.nether.net
clue++;      | http://puck.nether.net/~jared/  My statements are only mine.