[nsp] OSPFv3

[Nicolas DEFFAYET]

On Wed, 2003-10-01 at 17:21, Jared Mauch wrote:
> 	here's an example of a working ospfv3 config i have on
> one of my boxes.
> 
> IOS (tm) 3600 Software (C3640-IK9S-M), Version 12.3(3), RELEASE SOFTWARE (fc2)
> !
> interface FastEthernet0/0
>  ipv6 address 3FFE:A00:F:1::1/126
>  ipv6 ospf 267 area 0
> !
> ipv6 router ospf 267
>  log-adjacency-changes
> !

brutus#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
brutus(config)#ipv6 router ospf 25358
brutus(config)#int Ethernet0
brutus(config-if)#ipv6 ospf ?
% Unrecognized command
brutus(config-if)#

Don't work for me :(

Thanks

Best Regards,

-- 
Nicolas DEFFAYET, NDSoftware
NDSoftware IP Network: http://www.ip.ndsoftware.net/
FNIX6 (French National Internet Exchange IPv6): http://www.fnix6.net/
EuroNOG: http://www.euronog.org/