jared at puck.nether.net
Wed Oct 1 11:32:41 EDT 2003
On Wed, Oct 01, 2003 at 05:30:40PM +0200, Nicolas DEFFAYET wrote:
> On Wed, 2003-10-01 at 17:21, Jared Mauch wrote:
> > here's an example of a working ospfv3 config i have on
> > one of my boxes.
> > IOS (tm) 3600 Software (C3640-IK9S-M), Version 12.3(3), RELEASE SOFTWARE (fc2)
> > !
> > interface FastEthernet0/0
> > ipv6 address 3FFE:A00:F:1::1/126
> > ipv6 ospf 267 area 0
> > !
> > ipv6 router ospf 267
> > log-adjacency-changes
> > !
> brutus#conf t
> Enter configuration commands, one per line. End with CNTL/Z.
> brutus(config)#ipv6 router ospf 25358
> brutus(config)#int Ethernet0
> brutus(config-if)#ipv6 ospf ?
> % Unrecognized command
> Don't work for me :(
I wonder if it's unspported on the 2500.
Let me try it out in my spare 2500 i have kicking around here.
That is my guess. Cisco doesn't always remove the CLI
commands when a feature is not supported in an image.
Jared Mauch | pgp key available via finger from jared at puck.nether.net
clue++; | http://puck.nether.net/~jared/ My statements are only mine.
More information about the cisco-nsp