[nsp] OSPFv3

brad dreisbach bradd at eng.verio.net
Wed Oct 1 11:38:17 EDT 2003


On Wed, Oct 01, 2003 at 11:32:41AM -0400, Jared Mauch wrote:
> On Wed, Oct 01, 2003 at 05:30:40PM +0200, Nicolas DEFFAYET wrote:
> > On Wed, 2003-10-01 at 17:21, Jared Mauch wrote:
> > > 	here's an example of a working ospfv3 config i have on
> > > one of my boxes.
> > > 
> > > IOS (tm) 3600 Software (C3640-IK9S-M), Version 12.3(3), RELEASE SOFTWARE (fc2)
> > > !
> > > interface FastEthernet0/0
> > >  ipv6 address 3FFE:A00:F:1::1/126
> > >  ipv6 ospf 267 area 0
> > > !
> > > ipv6 router ospf 267
> > >  log-adjacency-changes
> > > !
> > 
> > brutus#conf t
> > Enter configuration commands, one per line.  End with CNTL/Z.
> > brutus(config)#ipv6 router ospf 25358
> > brutus(config)#int Ethernet0
> > brutus(config-if)#ipv6 ospf ?
> > % Unrecognized command
> > brutus(config-if)#
> > 
> > Don't work for me :(
> 
> 	I wonder if it's unspported on the 2500.
> 
> 	Let me try it out in my spare 2500 i have kicking around here.
> 
> 	That is my guess.  Cisco doesn't always remove the CLI
> commands when a feature is not supported in an image.

doesnt work on the 3620 platform either...

IOS (tm) 3600 Software (C3620-IK9O3S6-M), Version 12.3(3), RELEASE SOFTWARE (fc2)

(config)#ipv6 router ospf 7019
gw.spfdva(config)#int fas0/0
gw.spfdva(config-if)#ipv
gw.spfdva(config-if)#ipv6 ospf ?
% Unrecognized command

> 
> 	- Jared
> 
> -- 
> Jared Mauch  | pgp key available via finger from jared at puck.nether.net
> clue++;      | http://puck.nether.net/~jared/  My statements are only mine.
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/


More information about the cisco-nsp mailing list