[nsp] OSPFv3

[Harold Ritter]

Nicolas,

According to the Feature Navigator, ospfv3 is not supported on the 2500.

Here's the link for the Feature Navigator:

http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp

At 05:13 PM 10/1/2003 +0200, Nicolas DEFFAYET wrote:
>Hello,
>
>I try to run OSPFv3 on a lab router.
>This router run "IOS (tm) 2500 Software (C2500-IS-L), Version 12.3(3),
>RELEASE SOFTWARE (fc2)".
>
>brutus(config)#ipv6 router ospf 25358
>brutus(config)#
>
>Why i don't get:
>brutus(config-router)#
>
>
>The commands:
>
>sh ipv6 ospf
>
>and
>
>int Ethernet0
>  ipv6 ospf 25358 area 0 enable
>
>don't exist...
>
>
>Anyone use OSPFv3 on a 2500 router or have a idea about this ?
>
>Thanks
>
>Best Regards,
>
>--
>Nicolas DEFFAYET, NDSoftware
>NDSoftware IP Network: http://www.ip.ndsoftware.net/
>FNIX6 (French National Internet Exchange IPv6): http://www.fnix6.net/
>EuroNOG: http://www.euronog.org/
>
>_______________________________________________
>cisco-nsp mailing list  cisco-nsp at puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-nsp
>archive at http://puck.nether.net/pipermail/cisco-nsp/

Harold Ritter, CCIE 4168 (R&S / SP)
Advanced Services - SP East
Cisco Systems
1414 Massachusetts Avenue
Boxborough, MA 01719 USA
Phone: 978 936 1431
Cisco Systems- "Empowering the Internet Generation."