[nsp] 7600 and sup720 vs. rsp720?

[Tomas Daniska]

steinar,



> 
> See below for an example. We're running 12.1(13)E9, and will probably
> upgrade to 12.1(20)E when that becomes available (we need a particular
> bug fix for per destination load balancing which is scheduled for
> 12.1(20)E).

i'm going to deploy several with flexwan + enhanced gigeth osm modules


do you do mpls p or also pe on them?

--

deejay  

 
> Steinar Haug, Nethelp consulting/BaneTele (AS 3307)
> 
> 
> oslos-pe1>sh module
> Mod Ports Card Type                              Model        
>       Serial No.
> --- ----- -------------------------------------- 
> ------------------ -----------
>   1    2  Catalyst 6000 supervisor 2 (Active)    
> WS-X6K-S2U-MSFC2   SAL06344XCD
>   2    2  Catalyst 6000 supervisor 2 (Standby)   
> WS-X6K-S2U-MSFC2   SAL06344XEG
>   3   16  Pure SFM-mode 16 port 1000mb GBIC      
> WS-X6816-GBIC      SAL063246BR
>   4    0  2 port adapter FlexWAN                 WS-X6182-2PA 
>       SAD063303NF
>   5    0  Switching Fabric Module-128 (Active)   WS-C6500-SFM 
>       SAL06261S9C
>   7    0  4 port gigabit GE                      
> OSM-4GE-WAN-GBIC   SAD063000L5
>   9   48  48 port 10/100 mb RJ45                 
> WS-X6348-RJ-45     SAD041809PN
> 
> oslos-pe1>sh hard
> Cisco Internetwork Operating System Software
> IOS (tm) c6sup2_rp Software (c6sup2_rp-PSV-M), Version 
> 12.1(13)E9, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
> TAC Support: http://www.cisco.com/tac
> Copyright (c) 1986-2003 by cisco Systems, Inc.
> Compiled Sat 12-Jul-03 20:41 by hqluong
> Image text-base: 0x40008C00, data-base: 0x4179C000
> 
> ROM: System Bootstrap, Version 12.1(11r)E1, RELEASE SOFTWARE (fc1)
> BOOTLDR: c6sup2_rp Software (c6sup2_rp-PSV-M), Version 
> 12.1(13)E9, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
> 
> oslos-pe1 uptime is 8 weeks, 2 days, 16 hours, 51 minutes
> Time since oslos-pe1 switched to active is 8 weeks, 2 days, 
> 16 hours, 52 minutes
> System returned to ROM by power-on (SP by power-on)
> System restarted at 00:35:02 CEST Mon Aug 4 2003
> System image file is "sup-bootflash:c6sup22-psv-mz.121-13.E9"
> Host configuration file is "tftp://172.17.0.2/tacacs-update2"
> 
> cisco 7600 (R7000) processor with 458752K/65536K bytes of memory.
> Processor board ID SAL06334S8U
> R7000 CPU at 300Mhz, Implementation 39, Rev 3.3, 256KB L2, 
> 1024KB L3 Cache
> Last reset from power-on
> X.25 software, Version 3.0.0.
> Bridging software.
> 1 FlexWAN controller (2 Channelized OC3/STM-1).
> 1 GIGA-WAN controller (4 GIGAWAN Ports).
> 12 Virtual Ethernet/IEEE 802.3  interface(s)
> 48 FastEthernet/IEEE 802.3 interface(s)
> 24 Gigabit Ethernet/IEEE 802.3 interface(s)
> 100 Serial network interface(s)
> 2 Channelized STM-1 port(s)
> 381K bytes of non-volatile configuration memory.
> 
> 32768K bytes of Flash internal SIMM (Sector size 512K).
> Standby is up
> Standby has 458752K/65536K bytes of memory.
> 
> Configuration register is 0x2102
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
> 
>