[nsp] WCCP v2 problem

[James Galliford]

What version of IOS are you using?  

We have seen this on a 7500 series router running SP IOS and WCCP.  We
weren't, however, running dCEF at the time, only CEF.

Thanks.

-----Original Message-----
From: morph [mailto:morph at 0z0ne.com] 
Sent: Friday, October 10, 2003 8:08 AM
To: cisco-nsp at puck.nether.net
Subject: [nsp] WCCP v2 problem


Hi all

Any experience with High CPU utilisation with WCCP v2 enabled. Platform 
is CISCO 7507 with dCEF.

Even with the wccp disabled but the config still in the running config i

have around 70-80% of CPU load. The load only gets normal values (6%) 
when i delete ALL the configuration of wccp in the interfaces where it 
was applied.

Regards and greetings (this is my first post in the list :)

JJ

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/