[nsp] WCCP v2 problem

[morph]

Hi

It´s a 12.2(15)T7 version

regards

Javier

James Galliford wrote:

>What version of IOS are you using?  
>
>We have seen this on a 7500 series router running SP IOS and WCCP.  We
>weren't, however, running dCEF at the time, only CEF.
>
>Thanks.
>
>-----Original Message-----
>From: morph [mailto:morph at 0z0ne.com] 
>Sent: Friday, October 10, 2003 8:08 AM
>To: cisco-nsp at puck.nether.net
>Subject: [nsp] WCCP v2 problem
>
>
>Hi all
>
>Any experience with High CPU utilisation with WCCP v2 enabled. Platform 
>is CISCO 7507 with dCEF.
>
>Even with the wccp disabled but the config still in the running config i
>
>have around 70-80% of CPU load. The load only gets normal values (6%) 
>when i delete ALL the configuration of wccp in the interfaces where it 
>was applied.
>
>Regards and greetings (this is my first post in the list :)
>
>JJ
>
>_______________________________________________
>cisco-nsp mailing list  cisco-nsp at puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-nsp
>archive at http://puck.nether.net/pipermail/cisco-nsp/
>
>  
>