[nsp] Cisco 2600 series with wccp

[Glynn S. Condez]

Nope, its just a http only.

--Glynn

----- Original Message ----- 
From: "Voll, Scott" <Scott.Voll at wesd.org>
To: "Glynn S. Condez" <gcondez at coollink.us>; <cisco-nsp at puck.nether.net>
Sent: Tuesday, October 21, 2003 3:48 PM
Subject: RE: [nsp] Cisco 2600 series with wccp


> Is the hotmail inbox ssl or something like that?
> 
> Scott
> 
> -----Original Message-----
> From: Glynn S. Condez [mailto:gcondez at coollink.us] 
> Sent: Tuesday, October 21, 2003 6:40 AM
> To: cisco-nsp at puck.nether.net
> Subject: Re: [nsp] Cisco 2600 series with wccp
> 
> Now that ip cef is enabled, I have another concern with my WCCP. The
> Cisco
> Content Engine is running software version ce507-AV-4.1.1 (build feb 2,
> 2002).
> 
> Now my problem is when I tried to access website like www.hotmail.com
> and
> check my free email. When its accessing the inbox it displaying page not
> found or something like that. Its weird while other website like
> www.cnn.com
> works like a charm.
> 
> What should be the problem, did I miss something with the configuration
> or
> something needs to tweak the configuration to make it work smoothly.
> 
> Anyone experienced this kind of situation before?
> 
> 
> --Glynn
> 
> 
> ----- Original Message ----- 
> From: "Scott Morris" <swm at emanon.com>
> To: "'Glynn S. Condez'" <gcondez at coollink.us>;
> <cisco-nsp at puck.nether.net>
> Sent: Tuesday, October 21, 2003 12:12 PM
> Subject: RE: [nsp] Cisco 2600 series with wccp
> 
> 
> > Lack of memory may be part of it.  When using WCCP, it's generally a
> > good idea to run CEF to assist in optimizing that part of the
> solution.
> > At least that's my experience with 2600's and web caching.
> >
> > Scott
> >
> > -----Original Message-----
> > From: cisco-nsp-bounces at puck.nether.net
> > [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Glynn S.
> Condez
> > Sent: Tuesday, October 21, 2003 5:57 AM
> > To: cisco-nsp at puck.nether.net
> > Subject: [nsp] Cisco 2600 series with wccp
> >
> >
> > Hi All,
> >
> > I have a problem with my cisco 2611 with an IOS version 12.1(6) with
> > 32mb memory and 8mb flash.
> >
> > When I enable the wccp, sometimes "show running-config" won't display
> > anything. What should be the problem? lack of memory problem?
> >
> >
> > --Glen
> > _______________________________________________
> > cisco-nsp mailing list  cisco-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/
> >
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>