[nsp] ATM subifs, multipoint to p-t-p

[Charles Sprickman]

On Tue, 28 Oct 2003, Marcus Keane wrote:

>  Hi Charles, as far as I know, there is no way around this except
> "reload". You can then recreate the subinterface according to your
> desired type.

Thanks all for confirming that.  I was hoping there was another way...
The router is in need of an IOS update, so I'll bite the bullet and make
the change then.

Charles

> Marcus.
>
> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net
> [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Charles
> Sprickman
> Sent: Tuesday, 28 October 2003 11:21
> To: cisco-nsp at puck.nether.net
> Subject: [nsp] ATM subifs, multipoint to p-t-p
>
> Hi,
>
> Is there a trick to converting a bunch of "multipoint" atm subifs to
> "point-to-point"?  IOS simply says:
>
> "% Warning:  cannot change link type"
>
> So in the meantime it looks like I have to make new interfaces and
> destroy the old.  But even after getting rid of the old interface I
> can't recreate it as point-to-point; the same error is given.
>
> Is there any way around this?  I like to match my subint names to the
> pvcs they are associated with, and this throws that whole scheme out the
> window...
>
> Thanks,
>
> Charles
>
> --
> Charles Sprickman
> spork at inch.com
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
>
>