[nsp] ATM subifs, multipoint to p-t-p

[Marcus Keane]

 Hi Charles, as far as I know, there is no way around this except
"reload". You can then recreate the subinterface according to your
desired type.
Marcus.

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Charles
Sprickman
Sent: Tuesday, 28 October 2003 11:21
To: cisco-nsp at puck.nether.net
Subject: [nsp] ATM subifs, multipoint to p-t-p

Hi,

Is there a trick to converting a bunch of "multipoint" atm subifs to
"point-to-point"?  IOS simply says:

"% Warning:  cannot change link type"

So in the meantime it looks like I have to make new interfaces and
destroy the old.  But even after getting rid of the old interface I
can't recreate it as point-to-point; the same error is given.

Is there any way around this?  I like to match my subint names to the
pvcs they are associated with, and this throws that whole scheme out the
window...

Thanks,

Charles

--
Charles Sprickman
spork at inch.com

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/