[nsp] IOS 12.2(18)S1 and receive-only serial interfaces

Oleksandr Pantus alx at vsmu.vinnica.ua
Thu Oct 30 07:15:07 EST 2003


Hello !

7513 IOS 12.2(18)S1, RSP4+

We receive a couple of satellite links on this router. After migration
from 12.2(14)S to 12.2(18)S router's log shows the following:

Oct 29 13:44:52.389: %RSP-3-RESTART: interface Hssi9/1/0, not transmitting
-Traceback= 404C3110 404CE4F8
Oct 29 13:44:52.393: %RSP-3-RESTART: interface Serial12/1, not
transmitting
-Traceback= 404C3110 404CE4F8
Oct 29 13:44:52.401: %RSP-3-RESTART: interface Serial12/4, not
transmitting
-Traceback= 404C3110 404CE4F8
Oct 29 13:44:52.409: %RSP-3-RESTART: interface Serial12/5, not
transmitting
-Traceback= 404C3110 404CE4F8
Oct 29 13:48:53.798: %RSP-3-RESTART: interface Serial11/2, not
transmitting
-Traceback= 404C3110 404CE4F8
Oct 29 13:59:57.250: %RSP-3-RESTART: interface Hssi4/0, not transmitting
-Traceback= 404C3110 404CE4F8
Oct 29 14:34:07.873: %RSP-3-RESTART: interface Hssi9/1/0, not transmitting

All mentioned interfaces are receive-only. Router works fine, no other
problems are spotted. But I'm a little worrying about so much
%RSP-3-RESTART's in log. Any comments would be greatly appreciated.

-- 
S/Y,
Alexander, MD, 			nic-hdl: AJP1-UANIC


More information about the cisco-nsp mailing list