[nsp] Transport E1/T1 signal transparently over IP

[Wim De Houwer]

Hello All,

Does anyone know if it's possible to transport an E1/T1 signal over an IP network using 'normal' cisco equipment ?

The setup would be something like this:

E1/T1 --- Cisco Device <-- IP network --> Cisco Device -- E1/T1

The E1/T1 contains voice conversations and fax-transmissions.

Thanks in advance for all info anyone could provide ...

Best regards,

Wim De Houwer

Network Engineer
Tiscali N.V./S.A.
Rue Stassart 43 Stassartstraat
1050 Bruxelles-Brussel
Belgique - België
Tel.: +32 (0) 2 403.35.00
Fax.: +32 (0) 2 700.44.03
Dir.: +32 (0) 2 400.36.60
Email: wdehouwer at be.tiscali.com

Check out our portal: http://www.tiscali.be


-----------------------------------------------------------------------

Confidentiality statement:
This email message may contain confidential and privileged information and is intended to be for the use of the individual or entity named above. If you are not the intended recipient, be aware that any disclosure, copying, distribution, or use of the content of this message is prohibited. If you have received this message in error, please notify the sender by reply email and delete the material from your computer.