[nsp] 6509 Logging

[Thomas Renzy]

"terminal no monitor"

Thanks,
Thomas

Thomas Renzy 
IS&T Global Network Services
VERITAS Software
Office: +650-527-4734
Mobile: +650-248-1099
Fax: +650-527-2034

"Some people drink from the fountain of knowledge, others just gargle." -
Author Robert Anthony


-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] 
Sent: Thursday, September 11, 2003 5:54 AM
To: Rieman, Jeff
Cc: 'cisco-nsp at puck.nether.net'
Subject: Re: [nsp] 6509 Logging



Hi,

Are you sure you didn't enable "terminal monitor"? You can check this on the
first page of "show logging".

Rieman, Jeff said:
> I have our 6509 logging some ACL violations to a syslog server but it 
> also displays it to the console when I telnet in.  This makes it 
> nearly impossible to work on the box.  Is there a way to set the 
> logging up so it goes to the syslog server but does not get displayed 
> on the screen when you telnet in?
>
> Thanks!
>
> Jeff
>
> ===================================
> Jeff Rieman
> Network Manager
> Ohio Northern University
> Office: 419-772-2497
> Cell:    419-302-1271
> ===================================
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net 
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>


-- 
Sorin CONSTANTINESCU
adonay at dumnez.eu.org
Linux Registered User #222086
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/