[nsp] Viking flash in RSP4?
ejay.hire at isdn.net
Fri Sep 12 11:48:17 EDT 2003
These are ATA cards, so you have to call them "DiskX:" instead of
"SlotX:". I know these work in the 72xx/75xxs, please let me know if
they work in the RSP4s. This command should do what you want. "format
Hope that helps.
If anyone would like some of these, I have 5 48 MB sandisk cards
(formatted and tested in a 7204) that I'm getting ready to ebay. If you
need many, I can get a whole lot more within 2-3 days.
EjayHire at hotmail.com
From: Jeff Chan [mailto:cisco-nsp at jeffchan.com]
Sent: Friday, September 12, 2003 3:46 AM
To: cisco-nsp at puck.nether.net
Subject: [nsp] Viking flash in RSP4?
Has anyone successfully used the Viking flash memory:
VIKING 48MB DUAL VOLTAGE FLASH MODULE FOR CISCO
Manufacturer Part Number CS75RSP4/48FC
in their RSP4? When I try to format it, I get the following
non-helpful error message :) :
> Format operation may take a while. Continue? [confirm]
> Format operation will destroy all data in "slot1:". Continue?
> Enter volume ID (up to 64 chars)[default slot1]:
> %Error formatting slot1 (Unspecified error)
mailto:cisco-nsp at jeffchan.com
cisco-nsp mailing list cisco-nsp at puck.nether.net
archive at http://puck.nether.net/pipermail/cisco-nsp/
More information about the cisco-nsp