[nsp] vty cpu use limiting?

[Haesu]

A lot of helpful people have replied to me on this already :) Thanks a lot!!

Sounds like the best way to go is TFTP as its additive

-hc

-- 
Sincerely,
  Haesu C.
  TowardEX Technologies, Inc.
  WWW: http://www.towardex.com
  E-mail: haesu at towardex.com
  Cell: (978) 394-2867

On Fri, Sep 12, 2003 at 01:13:30PM -0400, Haesu wrote:
> Hi,
> 
> I am thinking about placing this huge prefix-list (over thousand lines long) on a cisco router that's doing quite a lot of traffic with bgp running..
> 
> I am sort of afraid this might impact the routing  when I paste the entire prefix-list b/c of possibly too 
> much cpu interrupt the vty terminal may cause... 
> 
> Is this even true? Should I be worrying about it? If so, is there a way to limit the cpu usage for vty?
> 
> Thanks,
> -hc
> 
> -- 
> Sincerely,
>   Haesu C.
>   TowardEX Technologies, Inc.
>   WWW: http://www.towardex.com
>   E-mail: haesu at towardex.com
>   Cell: (978) 394-2867
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/