[nsp] PA-MC-T3 card disabled

[Turpin Mark Contr AFCA/GCF]

Thomas - I think you might have been going with a bandwidth points approach.  This looks more like a firmware problem on the port adapter itself.

Brian - If you have a SMARTnet contract, I would open a TAC case.  I don't think there is much you can do on your own here.

cheers,
-Mark

-----Original Message-----
From: Brian Vowell [mailto:brian at digitalix.net]
Sent: Monday, September 15, 2003 4:11 PM
To: Thomas Renzy
Cc: cisco-nsp at puck.nether.net
Subject: Re: [nsp] PA-MC-T3 card disabled


Thomas Renzy wrote:

>Brian,
>
>What version of code are you running in this router, memory and flash? Also,
>in which slot is this card and what else is in the router?
>
>  
>
IOS 12.3(3)
NPE-200
128MB memory
20MB flash
C7200-I/O

tried the PA-MC-T3 in all four slots with same results.

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/