[nsp] NPE-G1 frustration

[Greg Steele]

This problem appears to still be present in 12.1(19)E2.

I cannot use 12.2S because of old (2 years old!) ATM SVC bugs.

...Greg
> 
> I upgraded one of my 7206VXRs from an NPE-300 to an NPE-G1 back in June
> and since that time I've had to replace hardware going on three times.
> The first time Cisco sent me a replacement G1 and the second time we
> forklifted in a new router, G1, interface cards and all...  This time
> around I'm pushing for all brand-spanking-new hardware, straight off the
> assembly line, as opposed to something that's been sitting in a parts
> depot for 6 months...  I'm pretty much at my wit's end with this thing.
> 
> The router has been resetting due to power-on, however further digging has
> shown that the reset was due to a watchdog timeout each time.  They
> references DDTS bug CSCea25622, which is supposed to be resolved.
> 
> Has anyone else had similar experiences with the NPE-G1 at this point?
> Was there a rash of bad G1s that made it through quality control or
> something?
> 
> Several IOS versions have been run since June.  Current one is 12.1(19)E,
> which is listed as a fixed version for CSCea25622.
> 
> jms
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>