[nsp] FW: Why does'nt this config work?

Dan.Brzoska at Broadwing.com Dan.Brzoska at Broadwing.com
Tue Sep 30 07:52:53 EDT 2003


Also see RFC 1998.

-----Original Message-----
From: Majid Siddiq [mailto:majid at pie.net.pk]
Sent: Tuesday, September 30, 2003 6:47 AM
To: d.holloway at hill.com; 'Cisco-Nsp
Subject: Re: [nsp] FW: Why does'nt this config work?


local pref is local to the router........you cannot set local pref on
outgoing updates.....you have to do this step on the incoming update on
router where u want to set LP 110.

regards
majid

----- Original Message -----
From: "Damien Holloway" <d.holloway at hill.com>
To: "'Cisco-Nsp" <cisco-nsp at puck.nether.net>
Sent: Tuesday, September 30, 2003 4:16 PM
Subject: [nsp] FW: Why does'nt this config work?


>
> Question that's bending my brain...
> I have applied the following config
>
> ************************************************
> router bgp xxxx
> neighbor x.x.x.x remote-as xxxx   ! iBGP peer
>  neighbor x.x.x.x default-originate
>  neighbor x.x.x.x route-map OUT out ! Set LocalPref to 110
> !
> access-list 2 permit 0.0.0.0
> !
> route-map OUT permit 5
>  match ip address 2
>  set local-preference 110
> *************************************************
>
> However the neighbor is not seeing the local pref being set, what have I
> missed?
>
>
>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
 +++The information transmitted is intended only for the person or entity to which it is
addressed and may contain confidential and/or privileged material.  Any review,
retransmission, dissemination or other use of, or taking of any action in reliance upon,
this information by persons or entities other than the intended recipient is prohibited.
If you received this in error, please contact the sender and destroy any copies of this
document.+++


More information about the cisco-nsp mailing list