[nsp] ciscoOamPingMIB

[Bruce Pinsky]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Denny Reiter wrote:
| Does anybody know if ciscoOamPingMIB is still valid, specifically
| for the 7206?  We're running 12.2(15)T5 currently.  I'm hopelessly
| lost in the MIB locator and can't even find it, though it's on the
| FTP site.  This would come in real handy for check ADSL connections
| remotely, like it does in the terminal.
|

It doesn't seem to have been deprecated at any point.  I found it is still
present in 12.0(27)S and 12.2(15)T9 with only a couple of minor diffs
between the versions.

That being said, I only find it being listed as supported on the LS1010 in
~ the Network Management Software section of the Software Center.  Add to
that the weirdness that all of the routers are listed under "Cisco Access
Products" and the LS1010 is listed under LAN switches and I can see where
it's hard to decipher what might be supported where.

To back up the findings of the Software Center, I found it listed in the
output of "show subsys" on an LS1010 like:

oampingmib          Management  1.000.000

However, testing on several routers with ATM, it doesn't ever seem to be
listed.

Since there is a specific subsystem defined for supporting it, it must be
present in the image to be supported.  If it's not listed in the output of
"show subsys", it is either not supported on that platform or not present
in that particular feature set image.

At this point, I'm inclined to think it is only supported on the LS1010.
Someone who is more knowledgable on this area of the products might have
better info than me however.

- --
=========
bep

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.2 (MingW32)

iD8DBQFAa8ImE1XcgMgrtyYRAv1cAJ9yarDzis9m8yAUraPmhuEeHaWFlACgu33p
FH/ppByovQcW/RWR4qEccmE=
=ftB2
-----END PGP SIGNATURE-----