[nsp] Cisco 3660 "BAD RAM"

[Raymond, Steven]

Dunno if this is helpful:

http://www.cisco.com/univercd/cc/td/doc/cisintwk/itg_v1/itga_mem.pdf

It lists a category for "3000", and am unsure if that covers the 36xx or
not, since they have subcategories for 32xx.



-----Original Message-----
From: Beprojects.com [mailto:info at beprojects.com]
Sent: Tuesday, April 13, 2004 9:01 AM
To: Cisco Nsp
Subject: [nsp] Cisco 3660 "BAD RAM"


Does anybody have a link to the Cisco "memory map" page?  I am looking for
the one that says what locations are used for what.  I have a 3660 that
crashes on botup with the following message:

System Bootstrap, Version 12.0(6r)T, RELEASE SOFTWARE (fc1)
Copyright (c) 1999 by cisco Systems, Inc.

Bad RAM at location 0xA0000000: wrote 0xA0000000, read 0xA0000008


No matter what RAM I put in there, I get the same message.  It almost seems
like a bad controller card.

Thanks.

Peder

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/