[c-nsp] Linerate 100mb on 7204 NPE-225?

[Mohacsi Janos]

On Mon, 2 Aug 2004, Deepak Jain wrote:

>> Depending on the number of interfaces you need, consider a Cat 3550.
>> If you don't need modularity, have a small (<8k) routing table, don't
>> plan on doing anything more than those static ACL's (i.e. no ip
>> inspect), then it'll do far more than 100mbit/s at any packet size for
>> alot less money (even comparing new vs. used).
>
>
> Seconded, a lot of 7200s doing ethernet can be replaced by 3550s.

Except if you need IPv6. If you need basic routing, then a 
switch with Enhanced Image can do most of thing.

Regards,
  	Janos Mohacsi