[c-nsp] Matching all MPLS traffic for a class map

[Temkin, David]

Any suggestions on how to map something like that into a tunnel?  I
can't think of how I'd do that for something locally originated on the
router... 

> -----Original Message-----
> From: Oliver Boehmer (oboehmer) [mailto:oboehmer at cisco.com] 
> Sent: Tuesday, August 03, 2004 10:34 AM
> To: Temkin, David; Rodney Dunn (rodunn)
> Cc: cisco-nsp at puck.nether.net
> Subject: RE: [c-nsp] Matching all MPLS traffic for a class map
> 
> 
> > My issue is that the traffic that's going in there isn't 
> IP, it's AToM 
> > (VP mode) and it's not in a tunnel so I can't set an 
> experimental bit 
> > on it apparently...
> 
> just configure an MQC service-policy inbound within your pvp 
> and set exp-bits in your class-default, then match on these 
> exp-bits as PHB along the path. should work. or you stuff 
> your PVP LSP into a TE-tunnel and set the exp-bits there..
> 
> 	oli
> 
> 

IMPORTANT: The information contained in this email and/or its attachments is confidential. If you are not the intended recipient, please notify the sender immediately by reply and immediately delete this message and all its attachments.  Any review, use, reproduction, disclosure or dissemination of this message or any attachment by an unintended recipient is strictly prohibited.  Neither this message nor any attachment is intended as or should be construed as an offer, solicitation or recommendation to buy or sell any security or other financial instrument.  Neither the sender, his or her employer nor any of their respective affiliates makes any warranties as to the completeness or accuracy of any of the information contained herein or that this message or any of its attachments is free of viruses.