[c-nsp] Matching all MPLS traffic for a class map
    Oliver Boehmer (oboehmer) 
    oboehmer at cisco.com
       
    Tue Aug  3 10:33:34 EDT 2004
    
    
  
> My issue is that the traffic that's going in there isn't IP, it's AToM
> (VP mode) and it's not in a tunnel so I can't set an experimental bit
> on it apparently...
just configure an MQC service-policy inbound within your pvp and set
exp-bits in your class-default, then match on these exp-bits as PHB
along the path. should work. or you stuff your PVP LSP into a TE-tunnel
and set the exp-bits there..
	oli
    
    
More information about the cisco-nsp
mailing list