[c-nsp] PRI config problem

[Ryan O'Connell]

Ýsmail CAN wrote:

>Hello,
> 
>I have PRI connection and want to originate calls from pstn. But I could not. Error is:
> 
>Jan  1 05:22:43.158: ISDN Se3/2:15 **ERROR**: isdn_cdapi_callback_from_rm: RM returned Reject, call_type 1 resource type 0
>Jan  1 05:22:43.162: ISDN Se3/2:15 Q921: User TX -> INFO sapi=0 tei=0, ns=117 nr=94
>Jan  1 05:22:43.162: ISDN Se3/2:15 Q931: DISCONNECT pd = 8  callref = 0x9140
>        Cause i = 0x80AC - Requested circuit/channel not available
>

This sounds like a mismatch between the timeslots configured on your end 
and what the provider has set - check with your provider what timeslots 
are active. (Bear in mind Cisco numbers from zero for "useable" 
timeslots, whereas providers number from 1 as slot zero is used for 
clocking)

-- 
         Ryan O'Connell - CCIE #8174
<ryan at complicity.co.uk> - http://www.complicity.co.uk

I'm not losing my mind, no I'm not changing my lines,
I'm just learning new things with the passage of time