[c-nsp] AS5300 + RADIUS - IP Address Assignment

[Tim Franklin]

cisco-nsp-bounces at puck.nether.net wrote:

> Two different VRF's is the same thing that came
> to mind for me too. ;)
>
> A default in each pointing to the respective next
> hop of each ISP.  You can do the same thing with
> PBR also but how do you know which PBR policy
> to attach to each dialin user?

You can push back a VRF to put the resulting virtual-access interface into
as an av-pair too.  In fact you ought to be able to push back any config
commands you like for the virtual-access interface with
"lcp:interface-config=blah", so I'd guess you could go down the PBR route
too.  VRF is nicer if the AS5300 supports it though.

Note: I've deployed the lcp:interface-config from av-pairs on a 7200
terminating L2TP calls, but not on AS5300 terminating dial calls directly.
YMMV.

Regards,
Tim.

--
____________   Tim Franklin                 e: tim at colt.net
\C/\O/\L/\T/   Product Engineering Manager  w: www.colt.net
 V  V  V  V    Managed Data Services        t: +44 20 7863 5714
                                            f: +44 20 7863 5876