[c-nsp] AS5300 + RADIUS - IP Address Assignment

[Rodney Dunn]

On Thu, Aug 12, 2004 at 02:11:44PM +0100, Tim Franklin wrote:
> cisco-nsp-bounces at puck.nether.net wrote:
> 
> > Two different VRF's is the same thing that came
> > to mind for me too. ;)
> >
> > A default in each pointing to the respective next
> > hop of each ISP.  You can do the same thing with
> > PBR also but how do you know which PBR policy
> > to attach to each dialin user?
> 
> You can push back a VRF to put the resulting virtual-access interface into
> as an av-pair too.  In fact you ought to be able to push back any config
> commands you like for the virtual-access interface with
> "lcp:interface-config=blah", so I'd guess you could go down the PBR route
> too.  VRF is nicer if the AS5300 supports it though.

True.

> 
> Note: I've deployed the lcp:interface-config from av-pairs on a 7200
> terminating L2TP calls, but not on AS5300 terminating dial calls directly.
> YMMV.
> 
> Regards,
> Tim.
> 
> --
> ____________   Tim Franklin                 e: tim at colt.net
> \C/\O/\L/\T/   Product Engineering Manager  w: www.colt.net
>  V  V  V  V    Managed Data Services        t: +44 20 7863 5714
>                                             f: +44 20 7863 5876
>