[c-nsp] Dial Backup

[Montes, Carlos M]

If possible I would like the router to detect the phone line down and take the interface down from its current status of Spoofing.  This might be asking too much but I had to ask.  

-----Original Message-----
From: Montes, Carlos M 
Sent: Thursday, August 12, 2004 9:51 AM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] Dial Backup


To all, I have a question about dial backup.  If you don't mind I need your help.  I have a 2600 with a Frame Relay circuit that's backed up by a Serial Interface that is working as an ASYNC interface with the appropriate command.  The Interface is then connected to a modem.  The backup works great as designed, however when the phone line is down the router is not able to detect the problem.  I did some testing of the backup yesterday and found out the backup phone line was dead.  

Is there any way that I can ensure that the phone line is available?


Thanks

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/