[c-nsp] Dial Backup

[christopher_a_kane at bankone.com]

Carlos,

One way could be to script a test that logs into the router and pings the 
IP address in the dialer map statement on a regular interval (once a 
month, once a quarter...).

-chris




Christopher A Kane

"Montes, Carlos M" <carlos.m.montes at boeing.com>
Sent by: cisco-nsp-bounces at puck.nether.net
08/12/2004 12:51 PM
 
        To:     <cisco-nsp at puck.nether.net>
        cc: 
        Subject:        [c-nsp] Dial Backup


To all, I have a question about dial backup.  If you don't mind I need 
your help.  I have a 2600 with a Frame Relay circuit that's backed up by a 
Serial Interface that is working as an ASYNC interface with the 
appropriate command.  The Interface is then connected to a modem.  The 
backup works great as designed, however when the phone line is down the 
router is not able to detect the problem.  I did some testing of the 
backup yesterday and found out the backup phone line was dead. 

Is there any way that I can ensure that the phone line is available?


Thanks

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/




This transmission may contain information that is privileged, confidential and/or exempt from disclosure under applicable law. If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution, or use of the information contained herein (including any reliance thereon) is STRICTLY PROHIBITED. If you received this transmission in error, please immediately contact the sender and destroy the material in its entirety, whether in electronic or hard copy format. Thank you.