[c-nsp] BGP Config

[Montes, Carlos M]

I've had better results using Prefix-List instead of the route maps.

-----Original Message-----
From: info at beprojects.com [mailto:info at beprojects.com]
Sent: Friday, August 13, 2004 8:09 AM
To: Cisco Nsp
Subject: [c-nsp] BGP Config


OK, I'm having a brain freeze at the moment and can't figure out why this
won't work.  I want to filter all incoming routes from a bgp neighbor and I
swear I've used this in the past.  Does this look right, or am I missing
something (I cut out all of the non-useful info).


router bgp 1234
  neighbor 1.1.1.1 route-map DenyAll in

ip access-list extended DENYALL
 deny   ip any any

route-map DenyAll permit 10
 match ip address DENYALL


I apply this, then I clear the routes and they all show up again.  I also
tried using a numbered acl instead of a named acl and the same result.
Thanks in advance.

Peder

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/