[c-nsp] Empty Flash problem on a 2900XL

[Lucas Iglesias]

Hi all,

I have an old Switch 2916XL wich seems to have its flash completelly erased
(it only has the image c2900XL-h2s-mz-120.5.1-XP.bin, but no DIAG image,
env_vars, vlan.dat or config.text). When tried to boot, it showed the error:
"Bootable image segment 12288 address range [0x4008f0, 0x3000] not in range
[0x30000, 0x33f98c]"
and stayed in the "switch:" prompt.

Is there any way to get this switch alive again ?

I looked up a tftp command in the switch boot loader image, but couldn't
find anything like it. I have that IOS and an older one on a TFTP ready to
be used.