[c-nsp] Empty Flash problem on a 2900XL

[Tima Maryin]

Hello!


http://www.cisco.com/en/US/products/hw/switches/ps607/products_tech_note09186a0080094955.shtml


Lucas Iglesias wrote:

> Hi all,
> 
> I have an old Switch 2916XL wich seems to have its flash completelly erased
> (it only has the image c2900XL-h2s-mz-120.5.1-XP.bin, but no DIAG image,
> env_vars, vlan.dat or config.text). When tried to boot, it showed the error:
> "Bootable image segment 12288 address range [0x4008f0, 0x3000] not in range
> [0x30000, 0x33f98c]"
> and stayed in the "switch:" prompt.
> 
> Is there any way to get this switch alive again ?
> 
> I looked up a tftp command in the switch boot loader image, but couldn't
> find anything like it. I have that IOS and an older one on a TFTP ready to
> be used.