[c-nsp] 7206 npe-300 boot image

[Oliver Boehmer (oboehmer)]

Hi James,


> I have a 7206 npe-300.
> IOS 12.2.24b
> boot flash is 4MB
> 
> Im trying to update boot loader.(got the router used ...)
> 
> the 12.2 boot images are to big to fit.
> All of the 12.1 boot images are deferred.
> I down loaded the latest 12.0 boot image (12.0.28a ),now I get error
> msgs at boot up. I think the errors are telling me that the boot
> image does not understand some of the config statements that were
> made using IOS 12.2.24b. Do these errors really matter?

In most cases you can ignore the errors.. they do matter in case those
commands are needed to access the tftp server when booting the IOS over
the network. But when you boot your IOS from flash, you can safely
ignore the errors..

> I haven't had to do this very often so I could be missing
> something.Any suggestions?

Please check http://www.cisco.com/warp/public/770/fn7771.shtml for more
information on this issue and recommended boot images for your IOS
image.

	oli