[c-nsp] IOS image upload from VRF

Jared Mauch jared at puck.nether.net
Thu Aug 26 15:45:24 EDT 2004


On Thu, Aug 26, 2004 at 10:41:59PM +0300, Volodymyr Yakovenko wrote:
> Hello!
> 
>  I am trying to figure out how to upload new IOS into 7200vxr running
>  12.2(18)S5 from tftp/ftp/rcp server situated not in GLOBAL but in VRF.
> 
>  First of all there is no possibility to specify VRF in exec's copy command
>  (at least in 12.2(18)S5).
> 
>  Secondly IOS does not support tftp server write functionality.
> 
>  It also looks like IOS rsh/rcp server functionality can not be accessed from 
>  VRF iface.
>  
>  Is there any other way to upload new IOS image into router from host, 
>  accessible from VRF?

	can you do this:

	ip rcmd source-interface <loopback-inside-vrf>

	then try your rcp copy again?

	- jared

-- 
Jared Mauch  | pgp key available via finger from jared at puck.nether.net
clue++;      | http://puck.nether.net/~jared/  My statements are only mine.


More information about the cisco-nsp mailing list