[c-nsp] IOS image upload from VRF

Volodymyr Yakovenko vovik at dumpty.org
Thu Aug 26 17:42:50 EDT 2004


On Thu, Aug 26, 2004 at 03:45:24PM -0400, Jared Mauch wrote:
>On Thu, Aug 26, 2004 at 10:41:59PM +0300, Volodymyr Yakovenko wrote:
>> Hello!
>> 
>>  I am trying to figure out how to upload new IOS into 7200vxr running
>>  12.2(18)S5 from tftp/ftp/rcp server situated not in GLOBAL but in VRF.
>> 
>>  First of all there is no possibility to specify VRF in exec's copy command
>>  (at least in 12.2(18)S5).
>> 
>>  Secondly IOS does not support tftp server write functionality.
>> 
>>  It also looks like IOS rsh/rcp server functionality can not be accessed from 
>>  VRF iface.
>>  
>>  Is there any other way to upload new IOS image into router from host, 
>>  accessible from VRF?
>
>	can you do this:
>
>	ip rcmd source-interface <loopback-inside-vrf>
>
>	then try your rcp copy again?

RCP (and only RCP) works. Tnx for the pointer!

RSH (which is also enabled) fails to work with the following message:

Aug 28 00:25:13.379: %TCP-2-INVALIDTCB: Invalid TCB pointer: 0x2277D8C0
-Process= "TCP Remote Shell", ipl= 0, pid= 128
-Traceback= 607C8E94 607CD5F0 608267D0 606B991C 606B9908

-- 
Regards,
Volodymyr.



More information about the cisco-nsp mailing list