[c-nsp] rate limiting on 6500s ?

[Cameron.Dry at didata.com.au]

Are you trying to police ingress or egress traffic ?

The Sup1/2 + MSFC1/2 will only do ingress policing.
The Sup720 will perform both ingress and egress policing.

Regards


Cameron

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of matthew zeier
Sent: Thursday, 9 December 2004 8:24 AM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] rate limiting on 6500s ?



This is a 6500 running 7.6(1) on a Sup1 and MSFC.

I have the following 20Mbps "cap" set -

set qos policer aggregate twentymeglimit rate 20480 burst 256 drop set
qos acl ip quick dscp 0 aggregate twentymeglimit ip any  any set qos acl
map quick 9/9

Is this syntax even right?


cricket still shows spikes well above 20Mbps so I'm not clear if the
syntax 
is right or if the ACL is after the interface counters increment.

--
matthew zeier, Sr. Network Engineer  | "Nothing in life is to be feared.
InteleNet Communications, Inc.       |  It is only to be understood."
(949) 784-7904                       |       - Marie Curie 

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/


******************************************************************************
 - NOTICE FROM DIMENSION DATA AUSTRALIA
This message is confidential, and may contain proprietary or legally privileged information.  If you have received this email in error, please notify the sender and delete it immediately.

Internet communications are not secure. You should scan this message and any attachments for viruses.  Under no circumstances do we accept liability for any loss or damage which may result from your receipt of this message or any attachments.
******************************************************************************