[c-nsp] 6500/7600 ip cef load-sharing

[Rodney Dunn]

That only applies to software switched packets by the MSFC
and hopefully you are not doing that.

You can't do PPLB in hardware.

I know some combinations of the sup you can consider the
L4 port information when splitting up the flows so you
may want to consider that which is done in hardware.

Rodney

On Sun, Dec 12, 2004 at 04:36:38PM +0200, Volodymyr Yakovenko wrote:
> Hello!
> 
>  Is there any way to force 6500/7600 router to perform per-packet load shring
>  on particular (VLAN) subinterface?
> 
>  kv-mo-l3s1(config-if)#ip load-sharing ?
>   per-destination  Deterministic distribution
>   <cr>
> 
> -- 
> Regards,
> Volodymyr.
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/