[c-nsp] 6500/7600 ip cef load-sharing

[Volodymyr Yakovenko]

On Sun, Dec 12, 2004 at 09:58:04AM -0500, Rodney Dunn wrote:
>That only applies to software switched packets by the MSFC
>and hopefully you are not doing that.
>
>You can't do PPLB in hardware.

Is there any way to force SUP720 to perform particular interface processing
by the MSFC?

>I know some combinations of the sup you can consider the
>L4 port information when splitting up the flows so you
>may want to consider that which is done in hardware.

Could you possibly provide me with some examples (I am using SUP720)?

>Rodney
>
>On Sun, Dec 12, 2004 at 04:36:38PM +0200, Volodymyr Yakovenko wrote:
>> Hello!
>> 
>>  Is there any way to force 6500/7600 router to perform per-packet load shring
>>  on particular (VLAN) subinterface?
>> 
>>  kv-mo-l3s1(config-if)#ip load-sharing ?
>>   per-destination  Deterministic distribution
>>   <cr>
>> 
>> -- 
>> Regards,
>> Volodymyr.
>> 
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/

-- 
Regards,
Volodymyr.