[c-nsp] Cisco gig ethernet config question

Robert Walton robert.walton at FFastFill.com
Thu Dec 16 20:00:11 EST 2004


cheers guys... it turns out our reseller installed one of the switches with LX gbics instead of SX!!! 

many thanks,
Rob

-----Original Message-----
From: Church, Chuck [mailto:cchurch at netcogov.com]
Sent: 16 December 2004 23:12
To: Robert Walton; cisco-nsp at puck.nether.net
Subject: RE: [c-nsp] Cisco gig ethernet config question


Robert,

	Couple possible config issues.  You're not allowing the native
VLAN.  Not sure what that would do.  Also, the speed nonegotiate command
doesn't seem needed.  GBICs only do gigabit, no speed could ever be
negotiated.  Away from the config, are these singlemode GBICs?  It's
possible your fiber distance is too short and you're over-driving the
receiver.  When you loop it and it works, you've just doubled the
distance, possibly making it work.  Just a couple ideas... 


Chuck Church
Lead Design Engineer
CCIE #8776, MCNE, MCSE
Netco Government Services - Design & Implementation Team
1210 N. Parker Rd.
Greenville, SC 29609
Home office: 864-335-9473
Cell: 703-819-3495
cchurch at netcogov.com
PGP key: http://pgp.mit.edu:11371/pks/lookup?op=get&search=0x4371A48D 


-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Robert Walton
Sent: Thursday, December 16, 2004 5:08 PM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] Cisco gig ethernet config question

Hi,

	Bit of a newbie question here but I've got two Gig E switches
directly connected with fibre - both catalyst 4006's.

	When i put fibre loops on at each end of the link i can bring
the opposite gbic up but as soon as i terminated the fibre pairs on the
gbics i get nothing... and yes i've tried switching the ends round.

The config i have at both ends is as follows...

interface GigabitEthernet5/1
 switchport trunk encapsulation dot1q
 switchport trunk native vlan 100
 switchport trunk allowed vlan 1,240,500,1002-1005
 switchport mode trunk
 description MSPBES001P (Gi1/1)
 speed nonegotiate
 no snmp trap link-status
 no cdp enable

any hints would be much appreciated... or example configs. ;o)

cheers guys...
Rob

________________________________________________________________________
This email and any files transmitted with it are confidential and
intended solely for the use of the individual or entity to whom they
are addressed. If you have received this email in error please notify
security at ffastfill.com

This email has been scanned for all viruses by the FFastFill Email
Security System.
________________________________________________________________________

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

________________________________________________________________________
This email and any files transmitted with it are confidential and
intended solely for the use of the individual or entity to whom they
are addressed. If you have received this email in error please notify
security at ffastfill.com

This email has been scanned for all viruses by the FFastFill Email
Security System.
________________________________________________________________________



More information about the cisco-nsp mailing list