[c-nsp] 2900XL and TACACS+
Brian Feeny
signal at shreve.net
Fri Dec 17 16:15:59 EST 2004
Ok,
then I am pretty sure its safe to say Cisco never supported TACACS in
4MB
Catalyst 2900XL images, which sucks for me :)
Brian
On Dec 17, 2004, at 3:13 PM, Jeff Chambers wrote:
> My mistake. Sorry for the bad info. I thought the
> 4MB was a reference to flash memory. After looking at
> the documentation, I now understand that the 4MB
> is a reference to the DRAM.
>
> The WS-C2924M-XL we have running
> c2900XL-h2s-mz-112.8.2-SA6.bin has 4MB of flash
> and 8MB of DRAM.
>
>
> Jeff Chambers.
>
>
>
> -----Original Message-----
> From: Brian Feeny [mailto:signal at shreve.net]
> Sent: Friday, December 17, 2004 3:41 PM
> To: Jeff Chambers
> Cc: 'cisco-nsp'
> Subject: Re: [c-nsp] 2900XL and TACACS+
>
>
>
>
> Jeff,
>
> I don't think that file is a c2900XL 4MB version file, since its stored
> in the normal c2900 directory. I tried
> to install on a 4MB c2900XL and it ran out of space.
>
> Brian
>
> On Dec 16, 2004, at 3:02 PM, Jeff Chambers wrote:
>
>> The really long direct link follows.
>>
>> http://www.cisco.com/cgi-bin/Software/Tablebuild/doftp.pl?
>> ftpfile=cisco/lan/
>> catalyst/2900XL/archives/c2900XL-h2s-mz-112.8.5-
>> SA6.bin&app=SWSearch&status=
>> showC2A
>>
>>
>> I used the following Software Search Tool to find it.
>>
>> http://www.cisco.com/cgi-bin/Software/SWSearch/SWSearch.cgi
>>
>>
>> Jeff Chambers.
>>
>>
>> -----Original Message-----
>> From: Brian Feeny [mailto:signal at shreve.net]
>> Sent: Thursday, December 16, 2004 1:38 PM
>> To: Jeff Chambers
>> Cc: 'cisco-nsp'
>> Subject: Re: [c-nsp] 2900XL and TACACS+
>>
>>
>>
>>
>> Jeff,
>>
>> Strangely enough all the "h2s" code on cisco seems to have vanished.
>> Do you have
>> any idea where that code is filed at so I can download it?
>>
>> Brian
>>
>> On Dec 13, 2004, at 4:45 PM, Jeff Chambers wrote:
>>
>>> I would try c2900XL-h2s-mz-112.8.5-SA6.bin (notice "h2s" in the name)
>>>
>>>
>>>
>>> I know c2900XL-h2s-mz-112.8.2-SA6.bin has TACACS+ support.
>>>
>>>
>>> In this old code, these lines work.
>>>
>>> "aaa authentication login default tacacs+ local"
>>>
>>> "aaa authentication login default local"
>>>
>>>
>>>
>>> This line does not work.
>>>
>>> "aaa authentication login default local tacacs+"
>>>
>>>
>>> Jeff Chambers.
>>>
>>>
>>> -----Original Message-----
>>> From: cisco-nsp-bounces at puck.nether.net
>>> [mailto:cisco-nsp-bounces at puck.nether.net]On Behalf Of Brian Feeny
>>> Sent: Tuesday, December 07, 2004 3:09 AM
>>> To: Marty Adkins
>>> Cc: 'cisco-nsp'
>>> Subject: Re: [c-nsp] 2900XL and TACACS+
>>>
>>>
>>>
>>> I have that code, but it doesn't look like TACACS+ is in there:
>>>
>>> amsouth-switch1#show version
>>> Cisco Internetwork Operating System Software
>>> IOS (tm) C2900XL Software (C2900XL-HS-M), Version 11.2(8.6)SA6,
>>> MAINTENANCE INTERIM SOFTWARE
>>> Copyright (c) 1986-1999 by cisco Systems, Inc.
>>> Compiled Fri 10-Dec-99 14:47 by cchang
>>> Image text-base: 0x00003000, data-base: 0x00211B54
>>>
>>> ROM: Bootstrap program is C2900XL boot loader
>>>
>>> amsouth-switch1 uptime is 6 days, 12 hours, 9 minutes
>>> System restarted by reload
>>> System image file is "flash:c2900XL-hs-mz-112.8.6-SA6.bin", booted
>>> via
>>>
>>>
>>> cisco WS-C2924-XL (PowerPC403GA) processor (revision 0x11) with
>>> 4096K/640K bytes of memory.
>>> Processor board ID 0x07, with hardware revision 0x00
>>> Last reset from warm-reset
>>>
>>> Processor is running Enterprise Edition Software
>>>
>>> amsouth-switch1(config)#aaa authorization network local ?
>>> if-authenticated Succeed if user has authenticated.
>>> none No authorization (always succeeds).
>>> <cr>
>>> amsouth-switch1(config)#tac?
>>> % Unrecognized command
>>>
>>> I read some docs too that eluded that this version would have
>>> TACACS+,
>>> but it doesn't seem to be there.
>>>
>>> Brian
>>>
>>>
>>>
>>> On Nov 30, 2004, at 3:45 PM, Marty Adkins wrote:
>>>
>>>> Brian Feeny wrote:
>>>>> Does any IOS version allow the 2900XL (4MB) to use TACACS+?
>>>>> cisco WS-C2924-XL (PowerPC403GA) processor (revision 0x11) with
>>>>> 4096K/640K bytes of memory.
>>>>> Processor board ID 0x07, with hardware revision 0x00
>>>>> Last reset from warm-reset
>>>>> I loaded enterprise 11.2 and didn't see it, but I would suspect
>>>>> that
>>>>> surely some image supported TACACS+
>>>> Support for the 4MB XLs ended with the 11.2(8.x)SA6 train. It
>>>> supports TACACS+
>>>> but not the later AAA. It does require the enterprise edition:
>>>> http://www.cisco.com/univercd/cc/td/doc/product/lan/c2900xl/
>>>> 29_35sa6/
>>>> eescg/mascupf.htm
>>>>
>>>> - Marty
>>>>
>>>> _______________________________________________
>>>> cisco-nsp mailing list cisco-nsp at puck.nether.net
>>>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>>>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>>>>
>>> ---------------------------------------------
>>> Brian Feeny, CCIE #8036, CISSP
>>> Network Engineer
>>> ShreveNet Inc.
>>>
>>> _______________________________________________
>>> cisco-nsp mailing list cisco-nsp at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>>>
>> ----------------------------------------------------------------------
>> -
>> -
>> ------
>> Brian Feeny, CCIE #8036, CISSP e: signal at shreve.net
>> Network Engineer p: 318.213.4709
>> ShreveNet Inc. f: 318.221.6612
>>
>>
> -----------------------------------------------------------------------
> -
> ------
> Brian Feeny, CCIE #8036, CISSP e: signal at shreve.net
> Network Engineer p: 318.213.4709
> ShreveNet Inc. f: 318.221.6612
>
>
------------------------------------------------------------------------
------
Brian Feeny, CCIE #8036, CISSP e: signal at shreve.net
Network Engineer p: 318.213.4709
ShreveNet Inc. f: 318.221.6612
More information about the cisco-nsp
mailing list