[c-nsp] 6500: OSM question

[Alexandre Snarskii]

Hi!

Got a problem with OSM: it is unable to boot, all i getting is the 
messages: 

Dec 24 17:02:24.123 MSK: %OIR-SP-3-PWRCYCLE: Card in module 9, is being powe
r-cycled off (Reset - Module Reloaded During Download)
Dec 24 17:02:24.123 MSK: %C6KPWR-SP-4-DISABLED: power to module in slot 9 se
t off (Reset - Module Reloaded During Download)

and than, after some power cycles, we getting

Dec 24 17:20:13.376 MSK: %CWAN_RP-3-BOOTFAIL: The WAN module in slot 9/0 fai
led to boot
Dec 24 17:20:13.376 MSK: %CWAN_RP-3-RESET_FAIL: The WAN module in slot 9 fai
led even after several resets

Router is running 12.2(17d)SXB1, -psv- (IP) featureset. 

RT001-301>show module 9 
Mod Ports Card Type                              Model              Serial No.
--- ----- -------------------------------------- ------------------ -----------
  9    0  4 port gigabit GE                      OSM-4GE-WAN-GBIC   SAD062101P0

Mod MAC addresses                       Hw    Fw           Sw           Status
--- ---------------------------------- ------ ------------ ------------ -------
  9  0003.fea9.616a to 0003.fea9.6179   1.0   Unknown      Unknown      PwrDown

Mod Online Diag Status 
--- -------------------
  9 Unknown


I'm suspecting a memory: we got that card from e-bay without memory at all,
and installed kningstone chip KVR100X64SC2L/128 (128MB PC100 SODIMM CL2). 
That chip does not support ECC, and OSM's by default comes with 
ECC memory. 

Is that suspection correct, or may be there is some another problem ?