[c-nsp] Shutting down main interface

[Hudson Delbert J Contr 61 CS/SCBN]

no...

the physical interface must be up.
the subints are logicals.
~piranha

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net]On Behalf Of Mario Antonio
Sent: Monday, December 27, 2004 12:52 PM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] Shutting down main interface


In the following configuration (Router 2621XM), can I shut down int f0/1
since I am using only the sub-interfaces?
What are the implications?


----------------------------------------------------------------------------
-----------------
!
interface FastEthernet0/1
 no ip address
 speed 100
 full-duplex
 no cdp enable
!
interface FastEthernet0/1.1
 encapsulation dot1Q 300
 ip address 10.20.100.1 255.255.255.0
 no cdp enable
!
interface FastEthernet0/1.2
 encapsulation dot1Q 201
 ip address 10.20.200.1 255.255.255.252
 no cdp enable
!


Regards

Mario Antonio

---
[This e-mail was scanned for viruses by Webjogger's AntiVirus Protection System]

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/