[nsp] Suggestions on terminating a bunch of T1's

[Jeff Chan]

Oops, I meant 4 wires (2 pairs).  But you get the idea....

Jeff C.
__

On Wednesday, February 4, 2004, 2:18:58 PM, Jeff Chan wrote:
> Hello Jim,
> We found that some "creative renegotiation" with the telco
> successfully altered their pricing for delivering on CT3.
> We put it "in their minds" that other telcos offer reasonably
> priced CT3 all the time (YMMV in your tariff area), and
> that maintenance and costs for delivery on a bigger pipe was
> better for everyone, including them. 

> On the other hand were were dealing directly with LECs who
> presumably owned the switches the T1s were coming out of
> and so had access to delivery of bigger pipes.  In other
> words it wasn't so much a matter of multiplexing our lines
> onto a DS3 as much as *not* demultiplexing them onto DS1 local
> loops.  Perhaps if you can get your telco mavens to talk far
> enough into the telco network, they can speak to whoever
> can deliver bigger pipes in the first place and everyone
> will be happy.  :)  In other words, can you catch the lines
> before they turn into 4 pair wires?

> Jeff C.
> __

> On Wednesday, February 4, 2004, 1:58:39 PM, Jim Devane wrote:
>> Bingo.

>> What they are insisting on charging for the MUX is firmly in the "are you
>> out of your mind?" range. 

>> -----Original Message-----
>> From: cisco-nsp-bounces at puck.nether.net
>> [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Streiner, Justin
>> Sent: Wednesday, February 04, 2004 1:21 PM
>> To: cisco-nsp at puck.nether.net
>> Subject: Re[2]: [nsp] Suggestions on terminating a bunch of T1's

>> On Wed, 4 Feb 2004, Richard J. Sears wrote:

>>> We currently terminate between 400 and 500 T1s utilizing two 7513s with
>>> Dual RSP4s, Vip2-50s with PA-MC-2T3s and it works great.
>>>
>>> Is there any way to bring them native in on CT3s as opposed to copper
>>> and having to run them through an M13...?

>> The telco should be able to do the M13 muxing for you, though they may
>> charge you a mux fee in addition to what you pay for the DS3 tail out of
>> their DACS.

>> jms
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/

>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/


-- 
Jeff Chan
mailto:cisco-nsp at jeffchan.com
http://www.supranet.net/